Canon PowerShot SX730 HS, SX740 HS - Ikelite Housing 6148.73
Rated 3.5/5 based on 11 customer reviews

Canon PowerShot SX730 HS, SX740 HS - Ikelite Housing 6148.73

Available: In Stock
Wishlist Compare
  • Product SKU: IKE-6148.73
$805.00

Underwater Housing for Canon PowerShot SX730, SX740 HS

Product # 6148.73

About this Product

A full featured and durable underwater housing for Canon PowerShot SX730 HS and SX740 HS cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

The zoom range of this camera is limited while inside of the housing in order to provide the best underwater imaging possible. The camera cannot be zoomed beyond 220mm equivalent inside of the housing.

The PowerShot SX730 HS / SX740 HS is a favorite camera for travel because of its compact size and extended, optically stabilized 40x zoom lens. A large 20.3MP BSI-CMOS sensor and 1080/60p video capture mean plenty of resolution for sharp images suitable for framing.

This compact and lightweight housing allows you to operate your Canon PowerShot SX730 HS / SX740 HS cameras up to depths of 200 feet (60m). It is designed and built in the USA by experienced divers with a commitment to providing top quality and value.

Large, easy-to-reach controls are provided for all camera functions except the Flash open lever. If using an external underwater strobe, simply open the flash prior to installation of the camera in the housing.

Rear controls are marked with easy-to-see laser engraved symbols which never fade or fall off. The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1/4-20 mounting point for attachment to a tripod topside.

Zoom and macro close-up

The optional WD-4 Wide Angle Dome provides a wider angle of view underwater without the edge distortion, heaviness, or difficult attachment typically associated with an external wide angle lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.

A press-fit Macro Adapter is available for the attachment of 67mm threaded accessory macro lenses. We recommend a macro lens which is designed for underwater use like those from Epoque, INON, Subsee, Nauticam, and other manufacturers. The adapter should not be used with 67mm threaded wide angle lenses. The wide angle lens would be too far away from the camera's lens to provide an improved image.

Color correction and external lighting

Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away.

Additional color correction and clarity can be obtained by adding a color filter or external light. The lens port of the housing accept our 3.9-inch diameter color filters, which are available for both tropical blue water and green water settings. A color filter reduces the amount of light that reaches the camera's sensor, so they are most effective in sunny conditions up to approximately 80 feet (24m).

A flash or constant on light is necessary for close-up, night dives, and deep depths. An external light also brings out more colors in sunny conditions. External lights are typically not used in conjunction with color filters, as the combination will result in tones that are too red or too purple.

The location of the camera's flash in relation to the lens makes it unusable for lighting your subject underwater. However, the camera's flash may be used to trigger an external strobe. Two ports are provided for the connection of up to two fiber optically triggered underwater strobes.

Alternatively, a bright constant-on video light can be used. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.

Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.

There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any compact camera system.

Vacuum Testing

A spare 1/2-20 threaded Accessory Port on the side of the housing is the perfect location for the installation of an optional vacuum valve. The Vacuum Kit # 47012 allows you to pressurize the housing to check for leaks prior to entering the water.

Durability and corrosion free performance

Our ABS-PC blend provides strength and corrosion free performance year after year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.

The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.

Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.

Underwater Housing for Canon PowerShot SX730, SX740 HS

Product # 6148.73

About this Product

A full featured and durable underwater housing for Canon PowerShot SX730 HS and SX740 HS cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

The zoom range of this camera is limited while inside of the housing in order to provide the best underwater imaging possible. The camera cannot be zoomed beyond 220mm equivalent inside of the housing.

The PowerShot SX730 HS / SX740 HS is a favorite camera for travel because of its compact size and extended, optically stabilized 40x zoom lens. A large 20.3MP BSI-CMOS sensor and 1080/60p video capture mean plenty of resolution for sharp images suitable for framing.

This compact and lightweight housing allows you to operate your Canon PowerShot SX730 HS / SX740 HS cameras up to depths of 200 feet (60m). It is designed and built in the USA by experienced divers with a commitment to providing top quality and value.

Large, easy-to-reach controls are provided for all camera functions except the Flash open lever. If using an external underwater strobe, simply open the flash prior to installation of the camera in the housing.

Rear controls are marked with easy-to-see laser engraved symbols which never fade or fall off. The front-loading camera mounting system makes installation and removal a breeze. The camera mounting plate allows ready access to the battery and memory card, and features a standard 1/4-20 mounting point for attachment to a tripod topside.

Zoom and macro close-up

The optional WD-4 Wide Angle Dome provides a wider angle of view underwater without the edge distortion, heaviness, or difficult attachment typically associated with an external wide angle lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.

A press-fit Macro Adapter is available for the attachment of 67mm threaded accessory macro lenses. We recommend a macro lens which is designed for underwater use like those from Epoque, INON, Subsee, Nauticam, and other manufacturers. The adapter should not be used with 67mm threaded wide angle lenses. The wide angle lens would be too far away from the camera's lens to provide an improved image.

Color correction and external lighting

Light is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away.

Additional color correction and clarity can be obtained by adding a color filter or external light. The lens port of the housing accept our 3.9-inch diameter color filters, which are available for both tropical blue water and green water settings. A color filter reduces the amount of light that reaches the camera's sensor, so they are most effective in sunny conditions up to approximately 80 feet (24m).

A flash or constant on light is necessary for close-up, night dives, and deep depths. An external light also brings out more colors in sunny conditions. External lights are typically not used in conjunction with color filters, as the combination will result in tones that are too red or too purple.

The location of the camera's flash in relation to the lens makes it unusable for lighting your subject underwater. However, the camera's flash may be used to trigger an external strobe. Two ports are provided for the connection of up to two fiber optically triggered underwater strobes.

Alternatively, a bright constant-on video light can be used. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.

Two 1/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.

There is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any compact camera system.

Vacuum Testing

A spare 1/2-20 threaded Accessory Port on the side of the housing is the perfect location for the installation of an optional vacuum valve. The Vacuum Kit # 47012 allows you to pressurize the housing to check for leaks prior to entering the water.

Durability and corrosion free performance

Our ABS-PC blend provides strength and corrosion free performance year after year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.

The unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.

Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.

  • Housing
  • Port cover # 0200.08
  • Silicone lubricant # 0184.1
  • 1 year limited warranty
  • Spare O-Ring Seal # 0109
  • WD-4 Wide Angle Lens # 6430.4
  • Macro Adapter for 3.9" Diameter Ports # 9306.82
  • UR/PRO Color Filter for Tropical Blue Water # 6441.46
  • UR/PRO Color Filter for Green Water # 6441.86
  • Yellow Fluorescence Filter # 6441.16
  • Action Tray with Left-Hand Handle # 2605.04
  • Action Tray Extension with Right Handle # 2605.05
  • Shutter Trigger Extension # 4077.93
  • Vacuum Kit for 1/2" Accessory Port # 47012
  • Fiber Optic Cord # 4501
  • 200 ft (60m) depth rating
  • Controls for all camera functions except Flash open lever; flash may be opened prior to installation of camera in the housing
  • Near neutral buoyancy in fresh water
  • 1/4-20 thread tray mounting with 3" (76mm) spacing
  • 2.7 lb (1225 g)
  • 6.5 x 6.8 x 5" (165 x 173 x 127 mm)
  • 3.9" diameter glass lens port allows effective zoom range of 25-220mm

How long will it take for my order to arrive after I make payment?

That depends on where you live and whether we have an item in stock or not. While we do have many items in stock, we don't carry everything. If you need an item in a hurry, it's a good idea to contact us and find out if your item is in stock.

If we have it in stock, we can usually send it out as soon as we receive payment, or you can pick it up. If an item is not in stock, we'll need to order it from our suppliers, which means it can take 1-2 weeks to arrive at your door (usually closer to a week).

Sometimes delivery can take longer, if our manufacturers are out of stock, for example, but this is unusual - we let customers know as soon as possible if something like this happens.

How do you ship my orders?

We use New Zealand Post and CourierPost to ship orders. Our default is courier, though you may organise an alternative with us by contacting us directly. CourierPost aims for next day delivery nationwide between major towns and cities in the North Island. South Island delivery can take two days. If you require next-day delivery in South Island, choose the express shipping option for the South Island. If you spend over $250 get your shipping for free!

Covid-19

We hope you, your families and friends are safe and healthy during the current Covid-19 situation.

As you may know we are a small team at Sea Tech Ltd. Our team has zero close contact with people outside our bubble.

We wish to assure you, that when we begin fulfilling orders on 28 April, we will be following the government health guidelines surrounding safe operating procedures. Hygiene basics such as hand washing, coughing/sneezing protocols as well as the wearing of appropriate protective equipment such as face masks.


We are continuing to follow the regular updates to government health guidelines and initiatives regarding Covid-19.


Please do not hesitate to contact us if you wish to discuss any aspect of our delivery service via Courier Post New Zealand.

We wish you all the best during these challenging times.

When you buy something from us, the price is literally exactly what it says on the tin.

If you buy something from an overseas supplier, that is most definitely not the case. While the product might seem like a great deal on screen, it's important to understand customs and import costs.

In addition to the ticket price on an overseas purchase, whatever the exchange rate is on the day (this can fluctuate wildly - trust us, we know), there are also tariffs, GST and border processing fees. This can easily add upwards of 25% to the ticket price. Items costing over NZ$1000 also incur import entry transaction fees.

In addition to these extra costs, Customs clearance can also cause delays. Sea Tech has been importing for years - we've got this down to a fine art, and we've built relationships with customs that help our items clear quickly.

By buying from Sea Tech, you avoid all the headaches, delays and extra costs. We handle all this stuff for you, so you don't even have to think about it.


Want to know more?