Canon EOS R6 Mk III - Nauticam NA-R6III Housing - 17345

NA-R6III Housing

The NA-R6III underwater housing embodies Nauticam’s commitment to innovation. Essential controls are conveniently accessible without removing your hands from the ergonomic handles. The N120 port lock II, Rotary housing lock, and Dedicated RF mount Lens REL lever facilitate an efficient setup that optimizes time spent in the water and minimizes time dedicated to rig maintenance. The N120 port system accommodates both Canon RF and EF mount lenses. Nauticam’s extensive range of ports and in-house corrective optics complement the NA-R6III’s capabilities. 

When equipped with an accessory vacuum valve, the integrated vacuum check and leak detection system provides continuous updates on the housing’s watertight integrity. A vacuum system reset switch, situated beneath the tray, eliminates the need to open the back of the housing during lens or port changes. The NA-R6III is prepared for customization to meet your specific shooting requirements, featuring optional Full Frame viewfinders for enhanced viewing, optical and electronic strobe triggering, and support for HDMI 2.0 and 1.4 monitors. The NA-R6III is capable of supporting additional mounting with 1/4-20, M10, and M5 holes on the housing’s top surface for monitors and lighting, while the bottom accepts the 25218 Tripod Mounting Ball set.

Premium Professional Optics

Nauticam’s professional water-contact optics deliver the highest underwater image quality. The FCP, WACP, and WWL lines enhance wide-angle, while the MFO and SMC offer exceptional macro and super macro capabilities. The EMWL allows you to shoot macro, wide-angle, or combine the styles for unique images.

Mission Control

In true Nauticam fashion, essential controls are placed as close to the handles as possible, making these housings the most intuitive and user-friendly available. Our engineers strategically position controls where they’re needed most, rather than simply near the corresponding buttons on the camera. Dials feature rubberized finger grooves, and levers are designed for smooth operation.

Integrated Vacuum Check & Leak Detection Electronics

The Nauticam vacuum check and leak detection system is shipped with NA-R6III as standard equipment. Combined with an accessory vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

Flash Triggering

Flash triggering on the Canon R6 Mark IIl in the NA-R6III is available via either optical or electrical trigging. 

Optical Triggering

• 26305 Mini Flash trigger for Fujifilm/Canon
• 26321 TTL Flash Trigger for Canon
  *26216 Universal Optical Fiber Cable is required.

Electrical Triggering

• 25017 M14 6 pin bulkhead for Canon system
• 25020 Canon hotshoe plug to a M14 Nikonos bulkhead (x and ground connection only)
• 26326 M24-M16 Adaptor for use with 26325

Compatible lenses

• RF Lenses with RF Lens Gear System II (PN: 19630 ~ 19637)
• EF Lenses with Canon mount adaptor EF to EOS R*
  *Zoom/focus gear for EF lenses are MOD items
  Canon Control Ring/Drop-in with V-ND Filter mount adaptor is unsupported

Housing O-rings

• 90137 Housing o-ring (I.D.=170mm, C.S.=2.5mm)

What’s in the box

• NA-R6III Housing
• Housing Cap
• 2 x Plugs for Optical Fibre Cable Mount
• Housing O-ring, lubricant, O-ring remover
• 2x Handles with mounting balls and handle brackets
• CR2032 Battery (preinstalled for moisture alarm and vacuum system)
• Allen Wrench Set
• Housing carry bag and shoulder strap