Inon LD Lens Holder for Float Arm

The LD Lens Holder for Float Arm attaches on Float Arm/Mega Float Arm/Mega Float Tube or on the "M5 Joint" installed on Stick Arm/Multi Ball Arm (*1) to carry 28LD series attachment lenses for comfortable handling of multiple lenses under water. The lens holder is screwed on an arm or M5 Joint through center screw hole.

In combination with "AD-LD Mount Converter for UCL-165AD" / "M67-LD Mount Converter for UCL-330/165M67", other series' attachment lenses can be attached as well in addition to 28LD Mount series lenses.

(*1) "Multi Ball Arm SS" is not compatible with the "M5 Joint". "Stick Arm XS" and "Multi Ball Arm S" can hold the "M5 Joint" but not compatible with a lens holder.

Weight: 32g (1.1oz) [air] / approx.7g (0.2oz) [underwater]

Combatibility

Compatible Arm etc.

• Float Arm S/M/ML
• Mega Float Arm S/M
• M5 Joint + Stick Arm SS/S/M/L
• M5 Joint + Multi Ball Arm ML/L/LL/XL
• Mega Float Tube S/M

Compatible Lens

• UWL-H100 28LD Wide Conversion Lens
• UCL-165LD Close-up Lens
• UCL-100LD Close-up Lens
• UCL-165AD Close-up Lens *1
• UCL-330 Close-up Lens *2
• UCL-165M67 Close-up Lens *2
• UCL-100M67 Close-up Lens *2
• UCL-67 LD Underwater Close-up Lens

*1 "AD-LD Mount Converter for UCL-165AD" is necessary. 
*2 "M67-LD Mount Converter for UCL-330/165M67" is necessary.

An INON attachment lens with long lens barrel such as "UFL-M150 ZM80" underwater micro fisheye lens or "UWL-S100 ZM80" wide conversion lens is supported by "LD Lens Holder DP for Float Arm".