Ikelite WD-3 Wide Angle Dome - 6430.3
-
Free Delivery
from $250
-
30 Day
return policy*
-
Secure
Payment System
-
The Best
Brands
The WD-3 Wide Angle Dome provides a wider angle of coverage underwater without the distorted edges or vignetting (dark shadows in the corners of the image) that are typically present when using a standard wide angle wet lens. At less than 6oz (168g), the WD-3 is also substantially lighter weight than the average wet lens and easier to use. The resulting image is crisp and clear edge-to-edge.
The WD-3 simply slides onto the standard port of the Ikelite housing— no modification to or replacement of the housing's original port is necessary. The WD-3 can be removed and replaced underwater so there is no limit to the camera's zoom or macro capabilities. Approximately 3/4 of the camera's zoom range can be used with the dome in place (varies by camera model).
The conversion dome features a 0.75x conversion factor to correct for the refractive magnification of a flat port underwater. The WD-3 Wide Angle Dome is compatible with any Ikelite housing featuring a 3.0-inch diameter lens port. To check compatibility with Ikelite housings, please refer to the housing instruction manual or webpage.
What's included
- Dome
- Lanyard
- Neoprene cover
- Magnification 0.75x
- 200 ft (60m) depth rating
- Optical grade acrylic
- Slightly positive buoyancy in fresh water
- Weight 5.9 oz (168 g)
- Dimensions 4 inches diameter x 1.7 inches length (101 x 43 mm)
Related Products
$3,330.00
Quick View
{"id":10182206791,"title":"Canon EOS 100D Rebel SL1 - Ikelite 200DLM\/C Housing 6970.03","handle":"canon-eos-100d-rebel-sl1-ikelite","description":"\u003ch5\u003eDescription \u003c\/h5\u003e\n\u003ch1\u003eIkelite 200DLM\/C Underwater Housing for Canon EOS 100D Rebel SL1\u003c\/h1\u003e\n\u003cp\u003eSince its introduction, the Canon EOS 100D Rebel SL1 system has become one of the most popular DSLR systems under water. It's universally loved due to its size, weight, ease of use and image quality. This updated version of the original housing for the EOS 100D includes the following new features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuper sensitive and ergonomic new shutter lever\u003c\/li\u003e\n\u003cli\u003eSpare port for optional vacuum valve (sold separately)\u003c\/li\u003e\n\u003cli\u003eUniversal 1\/4-20 threaded tray mounting\u003c\/li\u003e\n\u003cli\u003eNew white ABS-PC blend\u003c\/li\u003e\n\u003cli\u003eOptional single or dual tray \u0026amp; handles (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 100D SL1 system is a great choice whether you're upgrading from an older camera, or downsizing from a larger system. \u003ca href=\"http:\/\/www.ikelite.com\/support\/articles\/5-reasons-to-upgrade-to-the-canon-eos-100d.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRead why upgrading to the 100D Rebel SL1 may be right for you!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ikelite.smugmug.com\/Canon-EOS-100D-Rebel-SL1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out a sample image gallery\u003c\/a\u003e to see what this little camera is capable of!\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch3\u003eThe True TTL Advantage\u003c\/h3\u003e\n\u003cp\u003eTTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Unlike fiber optic systems, which attempt to copy the behavior of the camera's built-in flash, this unique housing for the Canon EOS 100D Rebel SL1 provides direct, electrical transmission of this TTL signal to the any current model Ikelite DS strobe.\u003c\/p\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems. When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. Additionally, in-line communication between the strobe and the camera completely eliminates signal interference and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003cp\u003eThe Ikelite-style electrical bulkhead is widely recognized as the most reliable waterproof strobe sync connection available.\u003c\/p\u003e\n\u003ch3\u003eErgonomics \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eWe've packed a lot in a small package, only slightly larger than the EOS 100D camera and just as comfortable to hold. Set up is a snap with simple, fully front-loaded camera installation. The camera mounting shoe is designed to be unobtrusive and allow changing of battery and memory cards, or attachment to a surface tripod without being removed from the camera. A smooth-action, sensitive shutter trigger is right at your fingertips whether holding the side of the housing or the optional dual tray with quick release handles. Controls are provided for all camera functions except for the rear touchscreen, so you have complete creative control anywhere you go.\u003c\/p\u003e\n\u003cp\u003eThe optional Single or Dual Tray with Quick Release Handles are now sold separately to prevent redundancy and benefit users who may be able to use trays from a previous system.\u003c\/p\u003e\n\u003ch3\u003eMaterials \u0026amp; Build Quality\u003c\/h3\u003e\n\u003cp\u003eOur brand new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003ch2\u003eOptics\u003c\/h2\u003e\n\u003cp\u003eThis housing comes standard with a optical grade acrylic dome port with zoom ring. This port provides sharp images and zoom capabilities with both the Canon EF-S 18-55mm STM kit lens, plus the popular Tokina 10-17mm lens. Minimal vignetting (dark shadows in the corners of the image) will be present in the 10-12mm range when used the Tokina lens. A special zoom gear system allows the camera with lens attached to be installed from the back of the housing, without requiring removal of the dome port.\u003c\/p\u003e\n\u003cp\u003eAn optional zoom sleeve (\u003ca href=\"\/products\/ikelite-zoom-sleeve-for-canon-10-18mm-stm-for-canon-eos-100d-5509-20\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eProduct Number 5509.20\u003c\/a\u003e) is available for use with the Canon 10-18mm STM lens, sold separately. This lens is accommodated by the standard dome port with no vignetting.\u003c\/p\u003e\n\u003cp\u003eThe dome port may be removed without tools to attach the optional Mirrorless Flat Port Macro Extended for use with the Canon EF-S 60mm Macro lens. Simply loosen the securing thumb screws and slide the port off. The optional Flat Port allows use of the 60mm Macro lens in auto-focus mode and features 67mm front threads for the optional attachment of macro converter wet lenses. This Flat Port can also be combined with the DLM 2.2 Inch Port Extension for use with the Canon 100mm USM IS Macro lens. The Lens Extension allows for auto focus only.\u003c\/p\u003e\n\u003cp\u003eThis housing was built to be the ultimate in compact, streamlined travel. Therefore this housing is not compatible with Fixed Lens Ports or Modular Lens Ports from our standard DSLR Lens Port System.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/canon-100d-port-chart.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLens Port Chart for Canon EOS 100D Rebel SL1\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEffective January 1, 2015, Flat Port product number 9304.53 is now offered as Mirrorless Flat Port Macro Extended product number 5516.50. These two product numbers are identical and may be used interchangeably.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes if the strobe features an electrical bulkhead; manual flash exposure only\u003c\/li\u003e\n\u003cli\u003eFiber optic: no\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eInternal Camera Mounting Tray # 9569.01\u003c\/li\u003e\n\u003cli\u003eMain O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eDome port # 5516.15\u003c\/li\u003e\n\u003cli\u003eZoom Sleeve # 5509.19\u003c\/li\u003e\n\u003cli\u003eNeoprene Port Cover # 0200.1\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSpare port o-ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eSpare set of 3 Port Thumb Screws # 9249.6\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube # 0184.1\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Rear Touch Screen\u003c\/li\u003e\n\u003cli\u003eIkelite Digital TTL ICS-5 5-pin Electrical Bulkhead plus TTL circuitry compatible with current model Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eWeight of housing 3 lb 3 oz (1.4 kg)\u003c\/li\u003e\n\u003cli\u003eWeight of dome port 13 oz (376 g)\u003c\/li\u003e\n\u003cli\u003eDimensions of housing 6.4 x 7.5 x 5.9 in (16 x 19 x 15 cm) including projections\u003c\/li\u003e\n\u003cli\u003eDimensions of dome port 5 in diameter x 3.3 in (13 x 8.5 cm) including projections\u003c\/li\u003e\n\u003cli\u003eOptical grade acrylic dome\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpare parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0110 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eMain o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0200.1 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort cover\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9249.6 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort Thumbscrews Set of 3\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9104.5 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eWaterproof bulkhead cap\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\u003ca href=\"\/products\/ikelite-zoom-sleeve-for-canon-18-55mm-stm-5509-19\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan class=\"pp-spare-number\"\u003e5509.19 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eZoom Sleeve for Canon 18-55mm STM\u003c\/span\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0184.2 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eSilicone lubricant resealable 2cc tube\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-04-11T13:24:00+12:00","created_at":"2017-04-11T13:24:10+12:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite","Ikelite Top Three Camera Kits"],"price":333000,"price_min":333000,"price_max":333000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5265092182047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IKE-6970.03","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 100D Rebel SL1 - Ikelite 200DLM\/C Housing 6970.03","public_title":null,"options":["Default Title"],"price":333000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/canon-eos-100d-rebel-sl1-ikelite-housing-6970-268-r1.49x_ae05ab40-3493-4324-b072-d2ec629a8c60.jpg?v=1508921705","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.03-canon-100d-rebel-sl1-c.jpg?v=1513210060","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.03-canon-100d-rebel-sl1-b.jpg?v=1508921707","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.03-canon-100d-rebel-sl1-d.jpg?v=1508921708","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.03-canon-100d-rebel-sl1-e.jpg?v=1508921709","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.03-canon-100d-rebel-sl1-f.jpg?v=1508921710"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/canon-eos-100d-rebel-sl1-ikelite-housing-6970-268-r1.49x_ae05ab40-3493-4324-b072-d2ec629a8c60.jpg?v=1508921705","options":["Title"],"content":"\u003ch5\u003eDescription \u003c\/h5\u003e\n\u003ch1\u003eIkelite 200DLM\/C Underwater Housing for Canon EOS 100D Rebel SL1\u003c\/h1\u003e\n\u003cp\u003eSince its introduction, the Canon EOS 100D Rebel SL1 system has become one of the most popular DSLR systems under water. It's universally loved due to its size, weight, ease of use and image quality. This updated version of the original housing for the EOS 100D includes the following new features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuper sensitive and ergonomic new shutter lever\u003c\/li\u003e\n\u003cli\u003eSpare port for optional vacuum valve (sold separately)\u003c\/li\u003e\n\u003cli\u003eUniversal 1\/4-20 threaded tray mounting\u003c\/li\u003e\n\u003cli\u003eNew white ABS-PC blend\u003c\/li\u003e\n\u003cli\u003eOptional single or dual tray \u0026amp; handles (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 100D SL1 system is a great choice whether you're upgrading from an older camera, or downsizing from a larger system. \u003ca href=\"http:\/\/www.ikelite.com\/support\/articles\/5-reasons-to-upgrade-to-the-canon-eos-100d.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRead why upgrading to the 100D Rebel SL1 may be right for you!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ikelite.smugmug.com\/Canon-EOS-100D-Rebel-SL1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out a sample image gallery\u003c\/a\u003e to see what this little camera is capable of!\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch3\u003eThe True TTL Advantage\u003c\/h3\u003e\n\u003cp\u003eTTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Unlike fiber optic systems, which attempt to copy the behavior of the camera's built-in flash, this unique housing for the Canon EOS 100D Rebel SL1 provides direct, electrical transmission of this TTL signal to the any current model Ikelite DS strobe.\u003c\/p\u003e\n\u003cp\u003eSince the camera is talking directly to the strobe, the camera's built-in flash does not need to fire. This dramatically increases battery life and virtually eliminates the recycle lag, allowing the camera to be triggered in more rapid succession than with optical-based systems. When shooting a fast moving object, this make the difference between going home with the shot or just talking about it. Additionally, in-line communication between the strobe and the camera completely eliminates signal interference and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003cp\u003eThe Ikelite-style electrical bulkhead is widely recognized as the most reliable waterproof strobe sync connection available.\u003c\/p\u003e\n\u003ch3\u003eErgonomics \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eWe've packed a lot in a small package, only slightly larger than the EOS 100D camera and just as comfortable to hold. Set up is a snap with simple, fully front-loaded camera installation. The camera mounting shoe is designed to be unobtrusive and allow changing of battery and memory cards, or attachment to a surface tripod without being removed from the camera. A smooth-action, sensitive shutter trigger is right at your fingertips whether holding the side of the housing or the optional dual tray with quick release handles. Controls are provided for all camera functions except for the rear touchscreen, so you have complete creative control anywhere you go.\u003c\/p\u003e\n\u003cp\u003eThe optional Single or Dual Tray with Quick Release Handles are now sold separately to prevent redundancy and benefit users who may be able to use trays from a previous system.\u003c\/p\u003e\n\u003ch3\u003eMaterials \u0026amp; Build Quality\u003c\/h3\u003e\n\u003cp\u003eOur brand new ABS-PC blend provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light gray color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003ch2\u003eOptics\u003c\/h2\u003e\n\u003cp\u003eThis housing comes standard with a optical grade acrylic dome port with zoom ring. This port provides sharp images and zoom capabilities with both the Canon EF-S 18-55mm STM kit lens, plus the popular Tokina 10-17mm lens. Minimal vignetting (dark shadows in the corners of the image) will be present in the 10-12mm range when used the Tokina lens. A special zoom gear system allows the camera with lens attached to be installed from the back of the housing, without requiring removal of the dome port.\u003c\/p\u003e\n\u003cp\u003eAn optional zoom sleeve (\u003ca href=\"\/products\/ikelite-zoom-sleeve-for-canon-10-18mm-stm-for-canon-eos-100d-5509-20\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eProduct Number 5509.20\u003c\/a\u003e) is available for use with the Canon 10-18mm STM lens, sold separately. This lens is accommodated by the standard dome port with no vignetting.\u003c\/p\u003e\n\u003cp\u003eThe dome port may be removed without tools to attach the optional Mirrorless Flat Port Macro Extended for use with the Canon EF-S 60mm Macro lens. Simply loosen the securing thumb screws and slide the port off. The optional Flat Port allows use of the 60mm Macro lens in auto-focus mode and features 67mm front threads for the optional attachment of macro converter wet lenses. This Flat Port can also be combined with the DLM 2.2 Inch Port Extension for use with the Canon 100mm USM IS Macro lens. The Lens Extension allows for auto focus only.\u003c\/p\u003e\n\u003cp\u003eThis housing was built to be the ultimate in compact, streamlined travel. Therefore this housing is not compatible with Fixed Lens Ports or Modular Lens Ports from our standard DSLR Lens Port System.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/canon-100d-port-chart.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLens Port Chart for Canon EOS 100D Rebel SL1\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEffective January 1, 2015, Flat Port product number 9304.53 is now offered as Mirrorless Flat Port Macro Extended product number 5516.50. These two product numbers are identical and may be used interchangeably.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes if the strobe features an electrical bulkhead; manual flash exposure only\u003c\/li\u003e\n\u003cli\u003eFiber optic: no\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eInternal Camera Mounting Tray # 9569.01\u003c\/li\u003e\n\u003cli\u003eMain O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eDome port # 5516.15\u003c\/li\u003e\n\u003cli\u003eZoom Sleeve # 5509.19\u003c\/li\u003e\n\u003cli\u003eNeoprene Port Cover # 0200.1\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSpare port o-ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eSpare set of 3 Port Thumb Screws # 9249.6\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube # 0184.1\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eControls for all camera functions except Rear Touch Screen\u003c\/li\u003e\n\u003cli\u003eIkelite Digital TTL ICS-5 5-pin Electrical Bulkhead plus TTL circuitry compatible with current model Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eWeight of housing 3 lb 3 oz (1.4 kg)\u003c\/li\u003e\n\u003cli\u003eWeight of dome port 13 oz (376 g)\u003c\/li\u003e\n\u003cli\u003eDimensions of housing 6.4 x 7.5 x 5.9 in (16 x 19 x 15 cm) including projections\u003c\/li\u003e\n\u003cli\u003eDimensions of dome port 5 in diameter x 3.3 in (13 x 8.5 cm) including projections\u003c\/li\u003e\n\u003cli\u003eOptical grade acrylic dome\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpare parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0110 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eMain o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0200.1 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort cover\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9249.6 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort Thumbscrews Set of 3\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9104.5 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eWaterproof bulkhead cap\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\u003ca href=\"\/products\/ikelite-zoom-sleeve-for-canon-18-55mm-stm-5509-19\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan class=\"pp-spare-number\"\u003e5509.19 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eZoom Sleeve for Canon 18-55mm STM\u003c\/span\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0184.2 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eSilicone lubricant resealable 2cc tube\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}
Quick View
{"id":11471061511,"title":"Canon EOS 200D Rebel SL2 - Ikelite 200DLM\/C TTL Housing 6970.05","handle":"canon-eos-200d-rebel-sl2-200dlm-c-ttl-housing-6970-05","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eAbout our packages\u003c\/h2\u003e\n\u003cp\u003eWe offer you two great package options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousing with Dome Port Kit for 18-55mm lens, which includes zoom gear 5515.11 \u0026amp; Dome Port 5516.15 - for the most common Canon 18-55mm f\/4-5.6 STM lens packaged with the Canon EOS 200D.\u003c\/li\u003e\n\u003cli\u003eHousing with Dome \u0026amp; Macro Port Kit for 18-55mm lens, which includes zoom gear 5515.11 \u0026amp; Dome Port 5516.15, as well as Extension 5516.65 \u0026amp; Flat Port 5516.45 - for the most common Canon 18-55mm f\/4-5.6 STM lens packaged with the Canon EOS 200D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ikelite.smugmug.com\/Canon-SL-2\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee sample images taken with the Canon EOS Rebel SL2...\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003eIkelite 200DLM\/C TTL Underwater Housing for the Canon EOS 200D Rebel SL2\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Canon EOS 200D Rebel SL2 is a welcome upgrade to the hugely popular EOS 100D Rebel SL1 Compact DSLR Camera. What makes this system so different from mirrorless and even other DSLR systems? The fact that the camera body is compact and lightweight, ergonomically shaped like a DSLR, and capable of accepting Canon EF mount lenses.\u003c\/p\u003e\n\u003cp\u003eWhether you've been shooting a full-frame DSLR or a compact point-and-shoot, the EOS 200D Rebel SL2 may be the best next step. This system combines fast focus, 24 megapixel resolution, TTL exposure, and great battery life into a housing that's half the size and weight of all other DSLR models.\u003c\/p\u003e\n\u003ch3\u003eErgonomics and handling\u003c\/h3\u003e\n\u003cp\u003eThis powerful compact housing includes all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional \u003ca href=\"http:\/\/www.ikelite.com\/accessories\/4077.93-shutter-trigger-extension.html\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 to put it within easy reach when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eNew soft-touch control knobs add comfort and extra grip to the most commonly used functions. Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eConfidence\u003c\/h3\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"\/products\/ikelite-vacuum-kit-for-accessory-port-12-inch-hole\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Kit\u003c\/a\u003e # 47012. A vacuum kit allows you to pressurize the housing to check for proper assembly prior to entering the water.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"\/products\/ike-6890\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStraight Magnified Viewfinder\u003c\/a\u003e # 6890 or \u003ca href=\"\/products\/45-degree-magnified-viewfinder-for-dslr-and-mirror\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder (Type 1)\u003c\/a\u003e # 6891.1.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003ch3\u003eTrue TTL exposure\u003c\/h3\u003e\n\u003cp\u003eLight is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away. For the best results, we recommend adding an external flash or high-powered constant-on light if you'll be diving regularly below 15' (3m).\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Canon EOS 200D Rebel SL2 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. The TTL system can be used with current model Ikelite DS series strobes. Refer to the Strobe Compatibility section for serial number requirements.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes are not capable of powering the circuitry. SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eThe built-in flash is not usable in this installation. Triggering of fiber optic strobes is not supported at this time. A strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eA bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.\u003c\/p\u003e\n\u003cp\u003eThere is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The \u003ca href=\"\/products\/ikelite-tray-with-dual-release-handles-952364\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTray with Dual Quick Release Handles\u003c\/a\u003e # 9523.64 is the most popular choice for both handling and attachment of accessories. We recommend installing the \u003ca href=\"\/products\/ikelite-shutter-trigger-extension-4077-93\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 when using a right-hand handle.\u003c\/p\u003e\n\u003ch3\u003ePort System\u003c\/h3\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003cp\u003eThe included Dome Port with Zoom # 5516.15 and Zoom Gear # 5515.11 are designed for use with the Canon 18-55mm f\/4-5.6 STM lens. Optional zoom gears are available for the Canon 10-18mm STM and popular Tokina 10-17mm Fisheye lenses.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/port-chart-dlm-c-system.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView DLM Type C Port Charts\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eDurability and corrosion free performance\u003c\/h3\u003e\n\u003cp\u003eOur white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes if the strobe features an electrical bulkhead; manual flash exposure only\u003c\/li\u003e\n\u003cli\u003eFiber optic: no\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eDome port # 5516.15\u003c\/li\u003e\n\u003cli\u003eNeoprene port cover # 0200.1\u003c\/li\u003e\n\u003cli\u003eZoom Gear # 5515.11\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant # 0184.2\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eDLM Type C port mount\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions; controls are not provided for Diopter Adjustment Knob, Display Button, Wi-Fi Button, Depth-of-field Preview Button, and Flash Button\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3 pounds (1.4 kg) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions 7.5 x 5.9 x 6 in (191 x 150 x 152 mm) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-03T11:09:06+13:00","created_at":"2017-10-03T11:18:52+13:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite","package","Package Deal"],"price":204000,"price_min":204000,"price_max":270000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":54451962631,"title":"Housing w Dome \u0026 Macro Port Kit","option1":"Housing w Dome \u0026 Macro Port Kit","option2":null,"option3":null,"sku":"IKE-6970.05+MP","requires_shipping":true,"taxable":true,"featured_image":{"id":30699397511,"product_id":11471061511,"position":11,"created_at":"2017-10-03T11:26:48+13:00","updated_at":"2017-10-25T21:55:31+13:00","width":1024,"height":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/Ikelite-Canon-EOS-200D-Dome-_-Macro-Kits.jpg?v=1508921731","variant_ids":[54451962631]},"available":true,"name":"Canon EOS 200D Rebel SL2 - Ikelite 200DLM\/C TTL Housing 6970.05 - Housing w Dome \u0026 Macro Port Kit","public_title":"Housing w Dome \u0026 Macro Port Kit","options":["Housing w Dome \u0026 Macro Port Kit"],"price":270000,"weight":0,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":5265093558303,"title":"Housing with Dome Port Kit","option1":"Housing with Dome Port Kit","option2":null,"option3":null,"sku":"IKE-6970.05","requires_shipping":true,"taxable":true,"featured_image":{"id":30699397575,"product_id":11471061511,"position":10,"created_at":"2017-10-03T11:26:49+13:00","updated_at":"2017-10-25T21:55:30+13:00","width":1024,"height":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/Ikelite-Canon-EOS-200D-Dome-Kit.jpg?v=1508921730","variant_ids":[5265093558303]},"available":true,"name":"Canon EOS 200D Rebel SL2 - Ikelite 200DLM\/C TTL Housing 6970.05 - Housing with Dome Port Kit","public_title":"Housing with Dome Port Kit","options":["Housing with Dome Port Kit"],"price":204000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-a.jpg?v=1508921721","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-b.jpg?v=1508921722","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-c.jpg?v=1508921723","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-d.jpg?v=1508921724","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-e.jpg?v=1508921725","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-f.jpg?v=1508921726","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-g.jpg?v=1508921727","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-h.jpg?v=1508921728","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-i.jpg?v=1508921729","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/Ikelite-Canon-EOS-200D-Dome-Kit.jpg?v=1508921730","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/Ikelite-Canon-EOS-200D-Dome-_-Macro-Kits.jpg?v=1508921731"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6970.05-canon-eos-200d-rebel-sl2-a.jpg?v=1508921721","options":["Port Options"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch2\u003eAbout our packages\u003c\/h2\u003e\n\u003cp\u003eWe offer you two great package options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousing with Dome Port Kit for 18-55mm lens, which includes zoom gear 5515.11 \u0026amp; Dome Port 5516.15 - for the most common Canon 18-55mm f\/4-5.6 STM lens packaged with the Canon EOS 200D.\u003c\/li\u003e\n\u003cli\u003eHousing with Dome \u0026amp; Macro Port Kit for 18-55mm lens, which includes zoom gear 5515.11 \u0026amp; Dome Port 5516.15, as well as Extension 5516.65 \u0026amp; Flat Port 5516.45 - for the most common Canon 18-55mm f\/4-5.6 STM lens packaged with the Canon EOS 200D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/ikelite.smugmug.com\/Canon-SL-2\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee sample images taken with the Canon EOS Rebel SL2...\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch1 class=\"ui-title-bar__title\"\u003eIkelite 200DLM\/C TTL Underwater Housing for the Canon EOS 200D Rebel SL2\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Canon EOS 200D Rebel SL2 is a welcome upgrade to the hugely popular EOS 100D Rebel SL1 Compact DSLR Camera. What makes this system so different from mirrorless and even other DSLR systems? The fact that the camera body is compact and lightweight, ergonomically shaped like a DSLR, and capable of accepting Canon EF mount lenses.\u003c\/p\u003e\n\u003cp\u003eWhether you've been shooting a full-frame DSLR or a compact point-and-shoot, the EOS 200D Rebel SL2 may be the best next step. This system combines fast focus, 24 megapixel resolution, TTL exposure, and great battery life into a housing that's half the size and weight of all other DSLR models.\u003c\/p\u003e\n\u003ch3\u003eErgonomics and handling\u003c\/h3\u003e\n\u003cp\u003eThis powerful compact housing includes all of our latest upgrades to controls and ergonomics. The shutter lever has been updated to a more sensitive and natural feeling curved design. The standard control hugs the side of the housing for comfortable use when hand holding. It can be easily extended using the optional \u003ca href=\"http:\/\/www.ikelite.com\/accessories\/4077.93-shutter-trigger-extension.html\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 to put it within easy reach when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eNew soft-touch control knobs add comfort and extra grip to the most commonly used functions. Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eConfidence\u003c\/h3\u003e\n\u003cp\u003eThe unique rear seal design prevents accidental twisting or stretching of the o-ring for simple and confident assembly. We have eliminated the need for an o-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the o-ring form a solid, watertight seal as it closes.\u003c\/p\u003e\n\u003cp\u003eA spare 1\/2-20 threaded accessory port is provided on the side of the housing for easily installation of the optional \u003ca href=\"\/products\/ikelite-vacuum-kit-for-accessory-port-12-inch-hole\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Kit\u003c\/a\u003e # 47012. A vacuum kit allows you to pressurize the housing to check for proper assembly prior to entering the water.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"\/products\/ike-6890\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStraight Magnified Viewfinder\u003c\/a\u003e # 6890 or \u003ca href=\"\/products\/45-degree-magnified-viewfinder-for-dslr-and-mirror\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder (Type 1)\u003c\/a\u003e # 6891.1.\u003c\/p\u003e\n\u003cp\u003eThe camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing.\u003c\/p\u003e\n\u003ch3\u003eTrue TTL exposure\u003c\/h3\u003e\n\u003cp\u003eLight is absorbed as it travels through even short distances underwater, making colors appear dull or monochromatic. To preserve the natural colors of your subject, it's important to stay within arm's reach—no more than 3-4 feet (1m) away. For the best results, we recommend adding an external flash or high-powered constant-on light if you'll be diving regularly below 15' (3m).\u003c\/p\u003e\n\u003cp\u003eAn integrated TTL circuit is fine-tuned to the Canon EOS 200D Rebel SL2 flash exposure protocol for the most accurate exposure possible. The circuit is powered by the strobe for zero maintenance and no batteries to change. Exposure compensation in TTL mode is supported using the camera's built-in control. The TTL system can be used with current model Ikelite DS series strobes. Refer to the Strobe Compatibility section for serial number requirements.\u003c\/p\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes are not capable of powering the circuitry. SEA\u0026amp;SEA, INON, and Nikonos strobes will still enjoy fast recycle times and improved battery life, but must be used in manual exposure modes only.\u003c\/p\u003e\n\u003cp\u003eThis housing provides a direct electrical connection to the camera's external flash hot shoe. Cord attachment is as easy as screwing in a light bulb, and the threaded fit prevents accidental detachment during use. The bulkhead connection has been moved to the top of the housing to keep cords out of your way and reduce strain on the cord ends. A variety of sync cord terminations are available for Ikelite, SEA\u0026amp;SEA, INON, or Nikonos strobes for ultimate versatility.\u003c\/p\u003e\n\u003cp\u003eThe built-in flash is not usable in this installation. Triggering of fiber optic strobes is not supported at this time. A strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003cp\u003eA bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.\u003c\/p\u003e\n\u003cp\u003eThere is a simple rule that brighter is better underwater. A high-quality lighting system can produce magazine quality results with almost any camera system.\u003c\/p\u003e\n\u003cp\u003eTwo 1\/4-20 threaded mounting points are included on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts. The \u003ca href=\"\/products\/ikelite-tray-with-dual-release-handles-952364\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTray with Dual Quick Release Handles\u003c\/a\u003e # 9523.64 is the most popular choice for both handling and attachment of accessories. We recommend installing the \u003ca href=\"\/products\/ikelite-shutter-trigger-extension-4077-93\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 when using a right-hand handle.\u003c\/p\u003e\n\u003ch3\u003ePort System\u003c\/h3\u003e\n\u003cp\u003eIt couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure with simple parts you can trust in a remote location.\u003c\/p\u003e\n\u003cp\u003eThis housing accepts ports from our DLM Port System to accommodate a selection of the best zoom, macro, and wide angle lenses for underwater use. Our custom optical grade acrylic domes components provide the color, clarity, and durability of glass at a fraction of the travel weight and cost.\u003c\/p\u003e\n\u003cp\u003eThe included Dome Port with Zoom # 5516.15 and Zoom Gear # 5515.11 are designed for use with the Canon 18-55mm f\/4-5.6 STM lens. Optional zoom gears are available for the Canon 10-18mm STM and popular Tokina 10-17mm Fisheye lenses.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/port-chart-dlm-c-system.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView DLM Type C Port Charts\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eDurability and corrosion free performance\u003c\/h3\u003e\n\u003cp\u003eOur white ABS-PC blend housing provides strength and corrosion free performance year with minimal maintenance. The specially formulated color deflects the sun to keep your camera running cooler, longer. Compared to black or clear housings, the light color provides superior contrast for enhanced view of the camera, LCD screen, and o-ring seal.\u003c\/p\u003e\n\u003cp\u003eIkelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit and function. Every unit is water pressure tested to 200 feet (60m). We back our products with over 50 years of experience and the best reputation for service within the dive industry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes if the strobe features an electrical bulkhead; manual flash exposure only\u003c\/li\u003e\n\u003cli\u003eFiber optic: no\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0110\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.36\u003c\/li\u003e\n\u003cli\u003eDome port # 5516.15\u003c\/li\u003e\n\u003cli\u003eNeoprene port cover # 0200.1\u003c\/li\u003e\n\u003cli\u003eZoom Gear # 5515.11\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant # 0184.2\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eDLM Type C port mount\u003c\/li\u003e\n\u003cli\u003eControls for all important camera functions; controls are not provided for Diopter Adjustment Knob, Display Button, Wi-Fi Button, Depth-of-field Preview Button, and Flash Button\u003c\/li\u003e\n\u003cli\u003eIkelite flash bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eTwo 1\/4-20 threaded tray mounts with 3-inch (76mm) spacing\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 3 pounds (1.4 kg) not including port\u003c\/li\u003e\n\u003cli\u003eDimensions 7.5 x 5.9 x 6 in (191 x 150 x 152 mm) including projections\u003c\/li\u003e\n\u003cli\u003eABS-PC, acrylic, and acetyl construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
$3,430.00
Quick View
{"id":11471492231,"title":"Canon EOS 5D MKII - Ikelite 200DL Housing 71700","handle":"canon-eos-5d-mark-ii-ikelite-200dl-housing-71700","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eShown with lens port (not included). A lens port must be purchased separately for waterproof operation.\u003c\/p\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system. Vacuum valve included. TTL circuitry sold separately. Lens port and zoom gear sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView DL Lens Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRead more about the \u003ca href=\"\/blogs\/product-information-new-releases\/about-the-ikelite-dry-lock-port-system\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eadvantages of the new Dry Lock (DL) port system...\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 200DL Underwater Housing for the Canon EOS 5D Mark II\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis popular model has been completely re-designed from the ground up to include all of our latest improvements.\u003c\/p\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThe single most important upgrade is our long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than our time-tested Four Lock (FL) system. The new ports are lighter and more adaptable, and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II\/III or the Canon EF 11-24mm, then the DL system is essential.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDL System Port Chart\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style \u003ca href=\"\/products\/ikelite-port-locks-for-fl-port-system-set-of-4-5509-04\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePort Locks for FL Port System (Set of 4)\u003c\/a\u003e # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. There are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"\/blogs\/product-information-new-releases\/about-the-ikelite-dry-lock-port-system\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. If you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by using the DL version instead.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible \u003ca href=\"\/products\/ikelite-vacuum-pump-with-gauge-47011\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Pump with Gauge\u003c\/a\u003e # 47011, sold separately.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housings supports your choice of shooting all manual or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003eYou can still enjoy the fastest and most accurate TTL exposure on the market by adding the \u003ca href=\"\/products\/ikelite-ct1k-canon-ttl-kit-46070\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCT1K Canon TTL Kit\u003c\/a\u003e # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eIn addition to the more ergonomic zoom control, we've also upgraded the all-important shutter and AF-ON levers to a more natural feeling curved design. Both controls can optionally be extended using the \u003ca href=\"\/products\/ikelite-shutter-trigger-extension-4077-93\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 for more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eEven our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is now front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"\/products\/ike-6890\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStraight Magnified Viewfinder\u003c\/a\u003e # 6890 or \u003ca href=\"\/products\/45-degree-magnified-viewfinder-for-dslr-and-mirror\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder (Type 2)\u003c\/a\u003e # 6891.2.\u003c\/p\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eOverall the housing is over 1\/2 pound lighter than its former FL (Four Lock) counterpart, housing model # 6871.02. If you're shooting an 8\" diameter dome, you'll save an additional 1 3\/4 pounds by using the DL version instead.\u003c\/p\u003e\n\u003cp\u003eOur new hard anodized aluminum base with quick release handle has also been streamlined for travel and is over 3\/4 pound lighter than our previous DSLR tray and handle system. The \u003ca href=\"\/products\/ike-4077-02\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRight-Hand Quick Release Handle\u003c\/a\u003e # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a \u003ca href=\"\/products\/ikelite-cable-grip-for-housings-4080-07\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCable Grip\u003c\/a\u003e # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.\u003c\/p\u003e\n\u003cp\u003eLike its predecessor and all of our housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCamera compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark II as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe options\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional CT1K Canon TTL Kit # 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure. Single Strobe Cord # 4103.51 \/ Dual Strobe Cord # 4103.52\u003c\/p\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe. Single INON or SEA\u0026amp;SEA Strobe Cord # 4118.1 \/ Dual INON or SEA\u0026amp;SEA Strobe Cord # 4118.2 \/ Single Nikonos SB Strobe Cord # 4116.31 \/ Dual Nikonos SB Strobe Cord # 4116.32\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes. Single Strobe Cord # 4103.51 \/ Dual Strobe Cord # 4103.52\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0132.61\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.45\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cover # 0200.92\u003c\/li\u003e\n\u003cli\u003eZoom Gear Retainer # 75900\u003c\/li\u003e\n\u003cli\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003e1\/16\" Hex Key # 0945.16\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eControls are provided for all important camera functions; Controls are not provided for Multi-controller, Dioptric Adjustment Knob, LCD Panel Illumination button, or Depth of Field Preview Button\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.9 lb (2.2 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5 x 7 x 6.5\" (241 x 178 x 165 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-03T12:52:25+13:00","created_at":"2017-10-03T13:01:28+13:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite"],"price":343000,"price_min":343000,"price_max":343000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":54456926599,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IKE-71700","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 5D MKII - Ikelite 200DL Housing 71700","public_title":null,"options":["Default Title"],"price":343000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-a.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-b.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-c.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-d.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-e.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-f.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-g.jpg?v=1513210042","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-h.jpg?v=1513210042"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71700-canon-5d-mark-ii-a.jpg?v=1513210042","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eShown with lens port (not included). A lens port must be purchased separately for waterproof operation.\u003c\/p\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system. Vacuum valve included. TTL circuitry sold separately. Lens port and zoom gear sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView DL Lens Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRead more about the \u003ca href=\"\/blogs\/product-information-new-releases\/about-the-ikelite-dry-lock-port-system\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eadvantages of the new Dry Lock (DL) port system...\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 200DL Underwater Housing for the Canon EOS 5D Mark II\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis popular model has been completely re-designed from the ground up to include all of our latest improvements.\u003c\/p\u003e\n\u003ch3\u003eLens Ports\u003c\/h3\u003e\n\u003cp\u003eThe single most important upgrade is our long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than our time-tested Four Lock (FL) system. The new ports are lighter and more adaptable, and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II\/III or the Canon EF 11-24mm, then the DL system is essential.\u003c\/p\u003e\n\u003cp\u003eMost popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the \u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDL System Port Chart\u003c\/a\u003e to choose the correct gear. Zoom gears sold separately.\u003c\/p\u003e\n\u003cp\u003eDue to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style \u003ca href=\"\/products\/ikelite-port-locks-for-fl-port-system-set-of-4-5509-04\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePort Locks for FL Port System (Set of 4)\u003c\/a\u003e # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. There are significant advantages to upgrading your lens ports which you can read about \u003ca href=\"\/blogs\/product-information-new-releases\/about-the-ikelite-dry-lock-port-system\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e. If you're shooting an 8\" diameter dome, you'll also save almost 2 pounds by using the DL version instead.\u003c\/p\u003e\n\u003ch3\u003eVacuum System\u003c\/h3\u003e\n\u003cp\u003eThe included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible \u003ca href=\"\/products\/ikelite-vacuum-pump-with-gauge-47011\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eVacuum Pump with Gauge\u003c\/a\u003e # 47011, sold separately.\u003c\/p\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eThis housings supports your choice of shooting all manual or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.\u003c\/p\u003e\n\u003cp\u003eYou can still enjoy the fastest and most accurate TTL exposure on the market by adding the \u003ca href=\"\/products\/ikelite-ct1k-canon-ttl-kit-46070\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCT1K Canon TTL Kit\u003c\/a\u003e # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.\u003c\/p\u003e\n\u003ch3\u003eControls and Set-Up\u003c\/h3\u003e\n\u003cp\u003eIn addition to the more ergonomic zoom control, we've also upgraded the all-important shutter and AF-ON levers to a more natural feeling curved design. Both controls can optionally be extended using the \u003ca href=\"\/products\/ikelite-shutter-trigger-extension-4077-93\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eShutter Trigger Extension\u003c\/a\u003e # 4077.93 for more comfortable use when using a right-hand quick release handle.\u003c\/p\u003e\n\u003cp\u003eEven our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.\u003c\/p\u003e\n\u003cp\u003eThe camera mount is now front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1\/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.\u003c\/p\u003e\n\u003ch3\u003eViewfinders\u003c\/h3\u003e\n\u003cp\u003eThe included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional \u003ca href=\"\/products\/ike-6890\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eStraight Magnified Viewfinder\u003c\/a\u003e # 6890 or \u003ca href=\"\/products\/45-degree-magnified-viewfinder-for-dslr-and-mirror\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e45° Magnified Viewfinder (Type 2)\u003c\/a\u003e # 6891.2.\u003c\/p\u003e\n\u003ch3\u003eHandling \u0026amp; Travel\u003c\/h3\u003e\n\u003cp\u003eOverall the housing is over 1\/2 pound lighter than its former FL (Four Lock) counterpart, housing model # 6871.02. If you're shooting an 8\" diameter dome, you'll save an additional 1 3\/4 pounds by using the DL version instead.\u003c\/p\u003e\n\u003cp\u003eOur new hard anodized aluminum base with quick release handle has also been streamlined for travel and is over 3\/4 pound lighter than our previous DSLR tray and handle system. The \u003ca href=\"\/products\/ike-4077-02\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRight-Hand Quick Release Handle\u003c\/a\u003e # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision machined aluminum base features 1\/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.\u003c\/p\u003e\n\u003cp\u003eA 1\/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.\u003c\/p\u003e\n\u003cp\u003eIf you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a \u003ca href=\"\/products\/ikelite-cable-grip-for-housings-4080-07\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCable Grip\u003c\/a\u003e # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cp\u003eOur new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.\u003c\/p\u003e\n\u003cp\u003eLike its predecessor and all of our housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCamera compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark II as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe options\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional CT1K Canon TTL Kit # 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure. Single Strobe Cord # 4103.51 \/ Dual Strobe Cord # 4103.52\u003c\/p\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe. Single INON or SEA\u0026amp;SEA Strobe Cord # 4118.1 \/ Dual INON or SEA\u0026amp;SEA Strobe Cord # 4118.2 \/ Single Nikonos SB Strobe Cord # 4116.31 \/ Dual Nikonos SB Strobe Cord # 4116.32\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes. Single Strobe Cord # 4103.51 \/ Dual Strobe Cord # 4103.52\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing\u003c\/li\u003e\n\u003cli\u003eRear O-Ring # 0132.61\u003c\/li\u003e\n\u003cli\u003eFront O-Ring # 0132.45\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003ePort Hole Cover # 0200.92\u003c\/li\u003e\n\u003cli\u003eZoom Gear Retainer # 75900\u003c\/li\u003e\n\u003cli\u003eTool for Zoom Gear Retainer # 0945.06\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003e1\/16\" Hex Key # 0945.16\u003c\/li\u003e\n\u003cli\u003e1\/8\" Hex Key # 0945.18\u003c\/li\u003e\n\u003cli\u003eControl + Push Button Tip Assortment # 9249\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eControls are provided for all important camera functions; Controls are not provided for Multi-controller, Dioptric Adjustment Knob, LCD Panel Illumination button, or Depth of Field Preview Button\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.9 lb (2.2 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5 x 7 x 6.5\" (241 x 178 x 165 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
$3,430.00
Quick View
{"id":10786159943,"title":"Canon EOS 5D MKIII, 5D MKIV, 5DS, 5DS R - Ikelite 200DL Housing 71702","handle":"canon-eos-5d-mark-iii-5d-mark-iv-5ds-5ds-r-ikelite-200dl-underwater-housing-71702","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a dive back rated to 200' (60m). Vacuum valve included. TTL circuitry sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView the DL System Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50DL Water Housing\u003c\/strong\u003e\u003cbr\u003e Product number 73702. Features the new Dry Lock (DL) Port system with a shallow back rated to 50' (15m). Vacuum valve included. TTL circuitry sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pp-slidecontent-box\"\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eProduct details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 200DL Underwater Housing for the Canon EOS 5D Mark III, Mark IV, 5DS, 5DS R\u003c\/h1\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) front and back; Back is interchangeable with optional lightweight 50' back sold separately\u003c\/li\u003e\n\u003cli\u003eSupremely functional for maximum creative control—access is provided for all important camera functions\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eVacuum valve included (pump sold separately)\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eOne spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately\u003c\/li\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eControls\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eCreative photo\/comparitive playback button\u003c\/li\u003e\n\u003cli\u003eRATE button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 200 ft (60m) Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eCamera compatibility\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eStrobe options\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003ch3 class=\"pp-h2\"\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eSpare parts\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0132.61 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eMain o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0132.45 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9104.5 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eWaterproof bulkhead cap\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0184.2 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eSilicone lubricant resealable 2cc tube\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\u003cspan class=\"pp-spare-name\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003ch5 class=\"pp-slide-heading\"\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.1 lb (2.3 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.6\" (234 x 180 x 168 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-07-14T16:06:31+12:00","created_at":"2017-07-14T16:09:43+12:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite"],"price":343000,"price_min":343000,"price_max":343000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47977833351,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IKE-71702","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 5D MKIII, 5D MKIV, 5DS, 5DS R - Ikelite 200DL Housing 71702","public_title":null,"options":["Default Title"],"price":343000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-a.jpg?v=1513210047","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-b.jpg?v=1513210047","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-c.jpg?v=1513210048","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-d.jpg?v=1513210048","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-e.jpg?v=1513210048","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-f.jpg?v=1513210048"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/71702-canon-5d-iii-iv-5ds-5dsr-a.jpg?v=1513210047","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a dive back rated to 200' (60m). Vacuum valve included. TTL circuitry sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView the DL System Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50DL Water Housing\u003c\/strong\u003e\u003cbr\u003e Product number 73702. Features the new Dry Lock (DL) Port system with a shallow back rated to 50' (15m). Vacuum valve included. TTL circuitry sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"pp-slidecontent-box\"\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eProduct details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 200DL Underwater Housing for the Canon EOS 5D Mark III, Mark IV, 5DS, 5DS R\u003c\/h1\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) front and back; Back is interchangeable with optional lightweight 50' back sold separately\u003c\/li\u003e\n\u003cli\u003eSupremely functional for maximum creative control—access is provided for all important camera functions\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eVacuum valve included (pump sold separately)\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eOne spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately\u003c\/li\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eControls\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eCreative photo\/comparitive playback button\u003c\/li\u003e\n\u003cli\u003eRATE button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 200 ft (60m) Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eCamera compatibility\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eStrobe options\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003ch3 class=\"pp-h2\"\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3 class=\"pp-h2\"\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eSpare parts\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0132.61 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eMain o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0132.45 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003ePort o-ring\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e9104.5 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eWaterproof bulkhead cap\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cspan class=\"pp-spare-number\"\u003e0184.2 \u003c\/span\u003e\u003cspan class=\"pp-spare-name\"\u003eSilicone lubricant resealable 2cc tube\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\u003cspan class=\"pp-spare-name\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003ch5 class=\"pp-slide-heading\"\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.1 lb (2.3 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.6\" (234 x 180 x 168 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
$3,020.00
Quick View
{"id":11332225863,"title":"Canon EOS 5D MKIII, 5D MKIV, 5DS, 5DS R - Ikelite 50DL Housing 73702","handle":"canon-eos-5d-mk-iii-5d-mk-iv-5ds-5ds-r-ikelite-50dl-housing-73702","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eShown with lens port (not included). A lens port must be purchased separately for waterproof operation.Camera not included.\u003c\/p\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a pool \u0026amp; surf back rated to 50' (15m). Vacuum valve included. TTL circuitry sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView the DL System Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/housings\/products\/canon-eos-5d-mark-iii-5d-mark-iv-5ds-5ds-r-ikelite-200dl-underwater-housing-71702\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e200DL Underwater Housing\u003c\/a\u003e\u003cbr\u003e Product number 71702. Features the new Dry Lock (DL) Port system with a dive back rated to 200' (60m). Vacuum valve included. TTL circuitry sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 50DL Underwater Housing for the Canon EOS 5D Mark III, Mark IV, 5DS, 5DS R\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) front with lightweight 50' (15m) back; Back is interchangeable with optional 200' back sold separately\u003c\/li\u003e\n\u003cli\u003eSupremely functional for maximum creative control—access is provided for all important camera functions\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eVacuum valve included (pump sold separately)\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eOne spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately\u003c\/li\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eControls\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCamera Compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe Options\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/p\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 50 ft (15m) Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e50' (15m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 lb (2 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.3\" (234 x 180 x 160 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-09-12T12:29:19+12:00","created_at":"2017-09-12T12:35:22+12:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite"],"price":302000,"price_min":302000,"price_max":302000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":53155820487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Ike-73702","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 5D MKIII, 5D MKIV, 5DS, 5DS R - Ikelite 50DL Housing 73702","public_title":null,"options":["Default Title"],"price":302000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-a.jpg?v=1513210045","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-b.jpg?v=1513210045","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-c.jpg?v=1513210045","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-d.jpg?v=1513210045","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-e.jpg?v=1513210045"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/73702-canon-5d-iii-iv-5ds-5dsr-a.jpg?v=1513210045","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eShown with lens port (not included). A lens port must be purchased separately for waterproof operation.Camera not included.\u003c\/p\u003e\n\u003cp\u003eFeaturing the new Dry Lock (DL) port system with a pool \u0026amp; surf back rated to 50' (15m). Vacuum valve included. TTL circuitry sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.ikelite.com\/images\/products\/housings\/general\/dl-port-charts.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eView the DL System Port Chart\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eAlternative Versions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/housings\/products\/canon-eos-5d-mark-iii-5d-mark-iv-5ds-5ds-r-ikelite-200dl-underwater-housing-71702\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e200DL Underwater Housing\u003c\/a\u003e\u003cbr\u003e Product number 71702. Features the new Dry Lock (DL) Port system with a dive back rated to 200' (60m). Vacuum valve included. TTL circuitry sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ch1\u003eIkelite 50DL Underwater Housing for the Canon EOS 5D Mark III, Mark IV, 5DS, 5DS R\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200' (60m) front with lightweight 50' (15m) back; Back is interchangeable with optional 200' back sold separately\u003c\/li\u003e\n\u003cli\u003eSupremely functional for maximum creative control—access is provided for all important camera functions\u003c\/li\u003e\n\u003cli\u003eThe NEW Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses\u003c\/li\u003e\n\u003cli\u003eExtra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system\u003c\/li\u003e\n\u003cli\u003eVacuum valve included (pump sold separately)\u003c\/li\u003e\n\u003cli\u003eIncluded Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes\u003c\/li\u003e\n\u003cli\u003eControl symbols are laser etched into the back and will never fade or rub off\u003c\/li\u003e\n\u003cli\u003eQuick install camera mount plate does not need to be removed for battery or memory card access\u003c\/li\u003e\n\u003cli\u003eOne spare 1\/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories\u003c\/li\u003e\n\u003cli\u003eIncludes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately\u003c\/li\u003e\n\u003cli\u003eSignature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel\u003c\/li\u003e\n\u003cli\u003eABS-PC and Lexan construction is fundamentally corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMade in the USA; Individually inspected for fit and water pressure tested to depth\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eControls\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShutter-release button\u003c\/li\u003e\n\u003cli\u003eZoom control (see port chart)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eRecord start\/stop button\u003c\/li\u003e\n\u003cli\u003eMain dial\u003c\/li\u003e\n\u003cli\u003eMode dial (lock release)\u003c\/li\u003e\n\u003cli\u003eMetering mode\/white balance button\u003c\/li\u003e\n\u003cli\u003eAF mode\/drive mode button\u003c\/li\u003e\n\u003cli\u003eISO button\u003c\/li\u003e\n\u003cli\u003eLens release button\u003c\/li\u003e\n\u003cli\u003eAF-ON button\u003c\/li\u003e\n\u003cli\u003eMENU button\u003c\/li\u003e\n\u003cli\u003eINFO button\u003c\/li\u003e\n\u003cli\u003eIndex\/magnify\/reduce button\u003c\/li\u003e\n\u003cli\u003ePlayback button\u003c\/li\u003e\n\u003cli\u003eErase button\u003c\/li\u003e\n\u003cli\u003eLive view shooting\/movie shooting switch\u003c\/li\u003e\n\u003cli\u003e* AE Lock button\u003c\/li\u003e\n\u003cli\u003eAF point selection button\u003c\/li\u003e\n\u003cli\u003eQuick control button\u003c\/li\u003e\n\u003cli\u003eSET Setting button\u003c\/li\u003e\n\u003cli\u003e[Q] Quick control dial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCamera Compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis housing is only compatible with the Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.\u003c\/p\u003e\n\u003cp\u003eDifferences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe Options\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3\u003eTTL Exposure\u003c\/h3\u003e\n\u003cp\u003eInstall optional Canon TTL Kit Product number 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.\u003c\/p\u003e\n\u003ch3\u003eNon-Ikelite Strobes\u003c\/h3\u003e\n\u003cp\u003eSEA\u0026amp;SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.\u003c\/p\u003e\n\u003ch3\u003eIkelite Non-Digital Strobes\u003c\/h3\u003e\n\u003cp\u003eOlder non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.\u003c\/p\u003e\n\u003ch3\u003eFiber Optic\u003c\/h3\u003e\n\u003cp\u003eFiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.\u003c\/p\u003e\n\u003ch3\u003eRemote Triggering\u003c\/h3\u003e\n\u003cp\u003eStrobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUnderwater Housing with 50 ft (15m) Back\u003c\/li\u003e\n\u003cli\u003eBase with Left-Hand Quick Release Handle # 4077.67\u003c\/li\u003e\n\u003cli\u003eWaterproof Bulkhead Cap # 9104.5\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant 1cc Tube # 0184.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e50' (15m) depth rating\u003c\/li\u003e\n\u003cli\u003e1\/4-20 thread base mounts with 3.5\" spacing\u003c\/li\u003e\n\u003cli\u003eNear neutral buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 lb (2 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.2 x 7.1 x 6.3\" (234 x 180 x 160 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
$3,740.00
Quick View
{"id":11527473095,"title":"Canon EOS 60D - Ikelite TTL Housing 6870.60","handle":"canon-eos-60d-ikelite-ttl-housing-6870-60","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch1\u003eIkelite TTL Underwater Housing for Canon EOS 60D\u003c\/h1\u003e\n\u003cp\u003eWe've designed this housing to offer one of the best performance to dollar purchases in the world. The Ikelite DSLR housing is a seamless blend of functionality, lighting integration, durability and waterproof integrity.\u003c\/p\u003e\n\u003cp\u003eA compatible Lens Port is required for waterproof operation. Port not included. \u003ca href=\"http:\/\/www.ikelite.com\/housings\/canon\/6870.60-canon-60d.html#\" target=\"_blank\" rel=\"noopener noreferrer\" onclick=\"toggle_visibility('lightbox-portrec'); return false;\"\u003eFind the right port for your lens\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eThe true TTL advantage\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eOther housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.\u003c\/p\u003e\n\u003cp\u003eFiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eExposure adjustment\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eExposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus\/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eErgonomics\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eAn over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1\/4-20 threaded top mount provides an additional attachment point for lightweight accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.\u003c\/p\u003e\n\u003cp\u003eThis housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with dual quick release handles\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eMicro-fiber lens cloth\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eControls are not provided for Depth-of-Field Preview button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.6 lb (2.5 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 10 x 7 x 6.5 in (25 x 18 x 16 cm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-13T11:11:39+13:00","created_at":"2017-10-13T11:14:20+13:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite"],"price":374000,"price_min":374000,"price_max":374000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":55024039751,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IKE-6870.60","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 60D - Ikelite TTL Housing 6870.60","public_title":null,"options":["Default Title"],"price":374000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6870.60-canon-60d-a.jpg?v=1513210037","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6870.60-canon-60d-b.jpg?v=1513210037","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6870.60-canon-60d-c.jpg?v=1513210037"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6870.60-canon-60d-a.jpg?v=1513210037","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003ch1\u003eIkelite TTL Underwater Housing for Canon EOS 60D\u003c\/h1\u003e\n\u003cp\u003eWe've designed this housing to offer one of the best performance to dollar purchases in the world. The Ikelite DSLR housing is a seamless blend of functionality, lighting integration, durability and waterproof integrity.\u003c\/p\u003e\n\u003cp\u003eA compatible Lens Port is required for waterproof operation. Port not included. \u003ca href=\"http:\/\/www.ikelite.com\/housings\/canon\/6870.60-canon-60d.html#\" target=\"_blank\" rel=\"noopener noreferrer\" onclick=\"toggle_visibility('lightbox-portrec'); return false;\"\u003eFind the right port for your lens\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eThe true TTL advantage\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eOther housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.\u003c\/p\u003e\n\u003cp\u003eFiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eExposure adjustment\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eExposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus\/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eErgonomics\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eAn over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1\/4-20 threaded top mount provides an additional attachment point for lightweight accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.\u003c\/p\u003e\n\u003cp\u003eThis housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with dual quick release handles\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eMicro-fiber lens cloth\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eControls are not provided for Depth-of-Field Preview button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.6 lb (2.5 kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 10 x 7 x 6.5 in (25 x 18 x 16 cm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
$3,330.00
Quick View
{"id":11527417415,"title":"Canon EOS 650D Rebel T4i (Kiss X6i), 700D Rebel T5i (Kiss X7i) - Ikelite Housing 6871.65","handle":"canon-eos-650d-rebel-t4i-kiss-x6i-700d-rebel-t5i-kiss-x7i-ikelite-housing-6871-65","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eA compatible Lens Port is required for waterproof operation. Port not included. \u003ca class=\"pp-click-enlarge pp-port-rec\" href=\"http:\/\/www.ikelite.com\/housings\/canon\/6871.65-canon-650d-700d.html#\" target=\"_blank\" rel=\"noopener noreferrer\" onclick=\"toggle_visibility('lightbox-portrec'); return false;\"\u003eFind the right port for your lens\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003eIkelite Underwater Housing for the Canon EOS 650D Rebel T4i (Kiss X6i), 700D Rebel T5i (Kiss X7i) \u003c\/h1\u003e\n\u003cdiv class=\"pp-slidecontent-box\"\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eThe true TTL advantage\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eOther housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.\u003c\/p\u003e\n\u003cp\u003eFiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eExposure adjustment\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eExposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus\/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eErgonomics\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eAn over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1\/4-20 threaded top mount provides an additional attachment point for lightweight accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eConstruction\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.\u003c\/p\u003e\n\u003cp\u003eThis housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with dual quick release handles\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eMicro-fiber lens cloth\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"pp-slide-heading\"\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eControls are not provided for Diopter Adjustment Control or Flash Button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.5lb (2.5kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5 x 6.7 x 6.5 (24 x 17 x 16.5 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2017-10-13T10:57:11+13:00","created_at":"2017-10-13T11:01:07+13:00","vendor":"Ikelite","type":"DSLR Housing","tags":["Canon","housing","Ikelite"],"price":333000,"price_min":333000,"price_max":333000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":55023339079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IKE-6871.65","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canon EOS 650D Rebel T4i (Kiss X6i), 700D Rebel T5i (Kiss X7i) - Ikelite Housing 6871.65","public_title":null,"options":["Default Title"],"price":333000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6871.65-canon-650d-700d-a.jpg?v=1513210037","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6871.65-canon-650d-700d-b.jpg?v=1513210037","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6871.65-canon-650d-700d-c.jpg?v=1513210037","\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6871.65-canon-650d-700d-d.jpg?v=1513210037"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1779\/8233\/products\/6871.65-canon-650d-700d-a.jpg?v=1513210037","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eA compatible Lens Port is required for waterproof operation. Port not included. \u003ca class=\"pp-click-enlarge pp-port-rec\" href=\"http:\/\/www.ikelite.com\/housings\/canon\/6871.65-canon-650d-700d.html#\" target=\"_blank\" rel=\"noopener noreferrer\" onclick=\"toggle_visibility('lightbox-portrec'); return false;\"\u003eFind the right port for your lens\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003eIkelite Underwater Housing for the Canon EOS 650D Rebel T4i (Kiss X6i), 700D Rebel T5i (Kiss X7i) \u003c\/h1\u003e\n\u003cdiv class=\"pp-slidecontent-box\"\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eThe true TTL advantage\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eOther housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or \"Through-The-Lens\" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.\u003c\/p\u003e\n\u003cp\u003eFiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eExposure adjustment\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eExposure adjustments directly through the back of the housing put the perfect shot within reach every time. Tweak your TTL exposure or take total manual control without taking your hand off of your housing. Controls on the back of the housing acts as a remote control for compatible Ikelite DS-series strobes. Access plus\/minus exposure compensation in TTL mode, plus manual power settings in half-stop increments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eErgonomics\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eAn over-sized knob smoothly engages our unique system of universal zoom gears. We provide two zoom sets with each housing, one for use with most popular larger diameter zoom lenses and a second designed for use with smaller diameter zoom lenses. Both sets are lightweight and easy to install with no modification to the lens required. A variety of dome and flat ports attach with four locking latches for maximum security and quick changes between dives.\u003c\/p\u003e\n\u003cp\u003eThis housing includes a balanced aluminum tray with our signature quick release handles for easy attachment and removal of external lighting. An aluminum 1\/4-20 threaded top mount provides an additional attachment point for lightweight accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eConstruction\u003c\/h2\u003e\n\u003cdiv class=\"feature-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cp\u003eSpecial polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.\u003c\/p\u003e\n\u003cp\u003eLike every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.\u003c\/p\u003e\n\u003cp\u003eThis housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eStrobe compatibility\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAF35: no\u003c\/li\u003e\n\u003cli\u003eDS50: yes, above serial number 70000\u003c\/li\u003e\n\u003cli\u003eDS51: yes\u003c\/li\u003e\n\u003cli\u003eDS125: yes, above serial number 5000\u003c\/li\u003e\n\u003cli\u003eDS160, DS161: yes\u003c\/li\u003e\n\u003cli\u003eDS200: yes\u003c\/li\u003e\n\u003cli\u003eNon-Ikelite: yes, manual flash exposure only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"pp-slide-heading\"\u003eWhat's included\u003c\/h2\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHousing\u003c\/li\u003e\n\u003cli\u003eTray with dual quick release handles\u003c\/li\u003e\n\u003cli\u003ePort hole cover\u003c\/li\u003e\n\u003cli\u003eWaterproof bulkhead cap\u003c\/li\u003e\n\u003cli\u003e5509.27 Universal zoom set up to 2.8-inch diameter\u003c\/li\u003e\n\u003cli\u003e5509.28 Universal zoom set 2.8 to 3.0-inch diameter\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant 1cc tube\u003c\/li\u003e\n\u003cli\u003eMicro-fiber lens cloth\u003c\/li\u003e\n\u003cli\u003e1 year manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5 class=\"pp-slide-heading\"\u003eSpecifications\u003c\/h5\u003e\n\u003cdiv class=\"section pp-slidecontent slide-this\" style=\"display: block;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200 ft (60m) depth rating\u003c\/li\u003e\n\u003cli\u003eAll important camera functions are accessible\u003c\/li\u003e\n\u003cli\u003eControls are not provided for Diopter Adjustment Control or Flash Button\u003c\/li\u003e\n\u003cli\u003eIkelite bulkhead connector with built-in TTL circuitry\u003c\/li\u003e\n\u003cli\u003eSlightly negative buoyancy in fresh water\u003c\/li\u003e\n\u003cli\u003eActual buoyancy varies depending on choice of lens and port\u003c\/li\u003e\n\u003cli\u003eWeight 5.5lb (2.5kg) not including tray + handles\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5 x 6.7 x 6.5 (24 x 17 x 16.5 mm) including projections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
