Fujifilm X-T3 - Nauticam housing NA-XT3 - 17155
Rated 3.5/5 based on 11 customer reviews

Fujifilm X-T3 - Nauticam housing NA-XT3 - 17155

Available: In Stock
Wishlist Compare
  • Product SKU: NAU-17155
$4,769.50

NA-XT3 for Fujifilm X-T3 Camera

The Nauticam NA-XT3 Underwater Housing

Nauticam has supported X-T1 and X-T2 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT3.  More than just an updated badge, the NA-XT3 is a complete redesign of the series.  With a form factor more closely resembling the NA-A9 for Sony's A9 mirrorless camera, the NA-XT3 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles.  An optional hand strap (PN 28130) can be added to the handles.  The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot.

The NA-XT3 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-L control.  The housing includes two M14 and one M24 bulkhead openings and an M5 threaded hole on top (underneath the cold shoe) for an additional ball mount.

The NA-XT3 uses the N100 Port System shared with the Fujifilm XH1 system.  A selection of port options are available for a variety of lenses.

Video Recording Features

The impressive video specs of the X-T3 prompted the addition of some video-centric features to the NA-XT3.  The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218), the same part as for the NA-A9.  

As the X-T3 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (17922).

Video shooting can decrease battery life so the NA-XT3 is compatible with an optional 2500 mAh USB-C Battery Pack (PN 36335) that sits below the camera tray inside the housing.

Flash Triggering

Reliable automatic flash exposure is available with the NA-XT3 and a variety of optically fired flashes, precisely reproducing the camera’s included EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood!

The NA-XT3 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain.

The NA-XT3 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (PN 26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance.

Integrated Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT3 as standard equipment. Combined with an optional M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing. 

Housing Locking Latches

The industry's easiest to use housing closure system, requiring very little hand strength to operate, secures the housing back in place. The latches are safely locked to prevent accidental opening, but are easy to open when needed for a quick battery or memory card change.

M24 HDMI 2.0 Bulkhead

A new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Inferno housing for Shogun/Ninja Inferno 7" 4K60 4:2:2 10-bit recorder/monitor.

Patented Port Locking System

Unveiled on the very first Nauticam DSLR housing in 2009, this locking lever has become a signature of the Nauticam brand. No twisting or threading action is required to mount a port, and it locks securely in place with this lever. Nauticam also offers locking port extensions, meaning a dome will never twist, even when used with a long extension ring.

Accessory Battery Extender

The NA-XT3 can be used with the optional 2500 mAh USB battery pack (PN 36335) that rests in a form fitting cradle beneath the camera and can be easily removed for charging.

Mission Control

The NA-XT3 places important camera controls as close to the handles as possible to ensure effortless and quick camera setting changes underwater to insure you don't miss the shot.  Thumb levers for playback and AF-L are within easy reach.

Ergonomic Rubberized Grips

Another legendary Nauticam feature, these rubberized grips have been used every Nauticam DSLR housing release and are now a feature on the NA-XT3. The zoom / focus control knob also features this same soft touch rubber coating for improved tactile feel.

NA-XT3 for Fujifilm X-T3 Camera

The Nauticam NA-XT3 Underwater Housing

Nauticam has supported X-T1 and X-T2 cameras and continues to create innovative and ultra-functional housings for this line with the NA-XT3.  More than just an updated badge, the NA-XT3 is a complete redesign of the series.  With a form factor more closely resembling the NA-A9 for Sony's A9 mirrorless camera, the NA-XT3 features DSLR-style housing and port lock mechanisms as well as integrated ergonomic handles.  An optional hand strap (PN 28130) can be added to the handles.  The housing is designed with our Mission Control concept of placing the most important camera controls as close to the handles as possible to facilitate effortless and quick camera operation to ensure you don't miss the shot.

The NA-XT3 features thumb levers near both handles, with the left thumb lever actuating the playback function and the right thumb lever the AF-L control.  The housing includes two M14 and one M24 bulkhead openings and an M5 threaded hole on top (underneath the cold shoe) for an additional ball mount.

The NA-XT3 uses the N100 Port System shared with the Fujifilm XH1 system.  A selection of port options are available for a variety of lenses.

Video Recording Features

The impressive video specs of the X-T3 prompted the addition of some video-centric features to the NA-XT3.  The base of the housing can accept Nauticam's Mounting Ball Set for Tripod (PN 25218), the same part as for the NA-A9.  

As the X-T3 can output DCI/UHD 4K at 60p with 4:2:2 quality over HDMI, a new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player (17922).

Video shooting can decrease battery life so the NA-XT3 is compatible with an optional 2500 mAh USB-C Battery Pack (PN 36335) that sits below the camera tray inside the housing.

Flash Triggering

Reliable automatic flash exposure is available with the NA-XT3 and a variety of optically fired flashes, precisely reproducing the camera’s included EF-X8 flash at a proportionally greater intensity. This system yields accurate automatic TTL flash performance – even in manual exposure mode – with no electrical sync cables to flood!

The NA-XT3 is also compatible with the Nauticam Mini Flash Trigger for Panasonic/Fujifilm (PN 26305). The Flash Trigger allows for rapid fire manual flash firing via fiber optic, with no camera battery drain.

The NA-XT3 comes fiber optic ready and accepts standard Sea & Sea style bushing connections. Nauticam Universal fiber optic cable system (PN 26216) for Inon, Sea&Sea strobes, provide exceptional light transmission for accurate TTL performance.

Integrated Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection system is pre-installed in the NA-XT3 as standard equipment. Combined with an optional M14 Vacuum Valve II (PN 25624), this monitoring system provides constant updates throughout the dive as to watertight integrity of the housing via a multi-color LED on the rear of the housing. 

Housing Locking Latches

The industry's easiest to use housing closure system, requiring very little hand strength to operate, secures the housing back in place. The latches are safely locked to prevent accidental opening, but are easy to open when needed for a quick battery or memory card change.

M24 HDMI 2.0 Bulkhead

A new M24 bulkhead has been incorporated into the housing to support an HDMI 2.0 connection to the Nauticam Atomos Inferno housing for Shogun/Ninja Inferno 7" 4K60 4:2:2 10-bit recorder/monitor.

Patented Port Locking System

Unveiled on the very first Nauticam DSLR housing in 2009, this locking lever has become a signature of the Nauticam brand. No twisting or threading action is required to mount a port, and it locks securely in place with this lever. Nauticam also offers locking port extensions, meaning a dome will never twist, even when used with a long extension ring.

Accessory Battery Extender

The NA-XT3 can be used with the optional 2500 mAh USB battery pack (PN 36335) that rests in a form fitting cradle beneath the camera and can be easily removed for charging.

Mission Control

The NA-XT3 places important camera controls as close to the handles as possible to ensure effortless and quick camera setting changes underwater to insure you don't miss the shot.  Thumb levers for playback and AF-L are within easy reach.

Ergonomic Rubberized Grips

Another legendary Nauticam feature, these rubberized grips have been used every Nauticam DSLR housing release and are now a feature on the NA-XT3. The zoom / focus control knob also features this same soft touch rubber coating for improved tactile feel.

  • NA-XT3 Housing
  • Padded Travel Case
  • CR2032 Battery for Vacuum System
  • Spare 90122 main O-ring, removal tool and lubricant
  • Set of Allen Keys
  • 25624 M14 Vacuum Valve II (Pushbutton Release)
  • 28130 Hand Strap for 28113 (For NA-1DXII/D500/D5/80D/A9)
  • 32201 Nauticam 180˚ straight viewfinder
  • 32203 Nauticam 45˚ viewfinder 
  • 36335 Battery Pack for NA-XT3 Housing (2500mAh, inc. USB cable) * USB C
  • 26305 Mini flash trigger for Panasonic/Fujifilm (compatible with NA-GH4/NA-XT1/XT2)
  • 25221 M10 Strobe mounting ball
  • 25218 Mounting Ball Set for Tripod (for NA-A9)
  • 17922 Nauticam Atomos Ninja V housing (HDMI 2.0) for Atomos Ninja V 5” 4Kp60 4:4:2 10-bit Recorder/Monitor/Player
 Dimension (W x H x D) 350mm x 210mm x 120mm
Weight  2.65kg (Air) 0.2kg (Water*)
Depth Rating 100m

* includes camera, Carl Zeiss Touit 2.8/50M, N100 Extension Ring 30 and Flat Port 32

How long will it take for my order to arrive after I make payment?

That depends on where you live and whether we have an item in stock or not. While we do have many items in stock, we don't carry everything. If you need an item in a hurry, it's a good idea to contact us and find out if your item is in stock.

If it is, we can usually send it out as soon as we receive payment. If an item is not in stock, we'll need to order it from our suppliers, which means it can take 1-2 weeks to arrive at your door (usually closer to a week).

Sometimes delivery can take longer, if our manufacturers are out of stock, for example, but this is unusual - we let customers know as soon as possible if something like this happens.

How do you ship my orders?

We use New Zealand Post and CourierPost to ship orders. Our default is courier, though you may organise an alternative with us by contacting us directly. CourierPost aims for next day delivery nationwide between major towns and cities in the North Island. South Island delivery can take two days. If you require next-day delivery in South Island, choose the express shipping option for the South Island. If you spend over $250 get your shipping for free!